ZHTW-1P: Auto Filling Machine (with Rotary Lobe Pump)

1. Suitable for fluid no gas and filling semi liquid.2. Adopts PLC and touch screen control.3. The use of submersible filling.4. In accordance with GMP standard.

Applicable Material: seed coating, SC, Cream high-viscosity materials etc.1. Accurate measurement: The servo control system to ensure that the total can reach a constant position of the piston.2. Variable speed filling: In the filling process, when close to the target filling volume to achieve a slow speed can be applied when filling, to prevent fluid overflow bottle pollution.3. To facilitate the adjustment: Replacement of filling in the specifications only in the touch screen you can change the parameters, and all the filling for the first time changes in place.Fine-tune the dose on touch screen to adjust

 This is our newly developed filling machine, the whole parameters have matched the international advanced level, especially, the partial have exceeded the relative line aboard, also certified by the world famous chemical magnate. Feature:◆This is an inline piston filling machine for cream and liquid. PLC and touch screen ◆control panel are used to control material filling. ◆Accurate measuring, advanced structure, stable operating, low noise, large adjusting range, and fast filling speed. ◆It is also suitable for materials that are easily volatilizing, easily crystallizing or easily bubbling; strong corrosive liquid for rubber, plastic, high viscous liquid, and semi-flow liquid. ◆Adjust and meter value in the control panel of touch screen, meanwhile, each filling head also can be adjusted. ◆The external surface of this machine is made of excellent stainless steel. Good appearance, apply to GMP standard.      Technical Parametermainunit dimension (L×W×H) : 2000mmX1100mmX2200mmfilling heads : 12bottle  size Diameter：φ40mm~φ100mm   High：80mm~300mmbottle mouth size:≥φ18mmfilling volume: 50ml~1000mlproduction capacity: ≤6000 p/herror range: 50ml-100ml≤±1ml 100ml~500ml±0.5% 500ml~1000ml±0.3%power supply: 220V;50HZPower: 1.5kwpneumatic (air-operated)source: 0.55Mpa~0.65Mpa

This is our newly developed filling machine, the whole parameters have matched the international advanced level, especially, the partial have exceeded the relative line aboard, also certified by the world famous chemical magnate. Feature:◆This is an inline piston filling machine for cream and liquid. PLC and touch screen ◆control panel are used to control material filling. ◆Accurate measuring, advanced structure, stable operating, low noise, large adjusting range, and fast filling speed. ◆It is also suitable for materials that are easily volatilizing, easily crystallizing or easily bubbling; strong corrosive liquid for rubber, plastic, high viscous liquid, and semi-flow liquid. ◆Adjust and meter value in the control panel of touch screen, meanwhile, each filling head also can be adjusted. ◆The external surface of this machine is made of excellent stainless steel. Good appearance, apply to GMP standard.      Technical Parametermainunit dimension (L×W×H) : 2600mmX1100mmX2200mmfilling heads : 8/12/16/20bottle  size Diameter：φ40mm~φ100mm   High：80mm~300mmbottle mouth size:≥φ18mmfilling volume: 50ml~250mlproduction capacity: ≤6000 p/herror range: 50ml-200ml≤±1mlpower supply: 220V;50HZPower: 1.5kwpneumatic (air-operated)source: 0.55Mpa~0.65Mpa

The filling system of the machine adopts ferrule type rapid installation sanitary connector. The whole cylinder can be easily assembled, disassembled and cleaned from top to bottom without any tools. The structure is simple in design and convenient in operation and maintenance.

It is suitable for the line of regular bottles less than 1000ml. Bottles are loaded manually, filling and capping is completed by these two combined machines, then to wet-glue or self-adhesive phase, products are put in cartons manually.Manual valve on bypass line of pump.Pump of 200 Lpm.In built memory to store 25 Recipes.Filling accuracy of +/- 0.25% till 5 Ltrs. & 0.1% till 15 Ltrs.As flushing system is given the product change over time is 15 to 20 minutes.As setting of the volume is through PLC product change time is 15 to 20 minutes. To make it more fast we have provided with in built memory which can store and recall whenever required.

This weighing filling machine is for filling 10kg to 50kg liquid. It automatically achieves counting inlet bottle, gravity filling, and bottle outlet. It is especially good for filling SL, edible oil and lubrication. It is a nice choice for foodstuff pharmacy, cosmetic and chemical industries.Major Characteristics:◆This weighing filling machine is for filling 10kg to 50kg liquid.. ◆ Each filling head has the weigh and feedback system, each filling head can be regulated◆This type filler adopts PLC to control, touch screen control panel◆ It applies dive method to fill and it reduces foam.◆ This machine adopts PLC and touch screen control panel, so it is convenient to set. ◆ Each filling head has the weigh and feedback system, each filling head can be regulated.◆ Photoelectric sensor, approximate switch and other electric elements are of the international famous brands. It ensures no container miss filling. The host machine will alarm if there is any container blocked.◆It applies dive method to fill and it reduces foam; it is suitable for various kinds of filling products.◆ The whole machine meets GMP standard, it is easy to clean and maintain, and the parts which contact with the filling material are made of high quality stainless steel. The whole machine is safe, eco-friendly and sanitary. It adapts to various kinds of working places. Main Performance parameter:Outline Dimension (L×W×H):2500mm×1700mm×2300mmNumber of filling Head:4Suitable bottle:Length:160mm~360mmWidth:140mm~260mmHeight:250mm~500mmDiameter of bottle mouth:≥Φ40mmSuitabe range:5L~50LProduction capacity:≤480bottles/hour(tested by water)Filling Error:±15mlVoltage:220V;50HzPower of host machine:3kwPneumatic (air-operated) source:0.5Mpa~0.65Mpa clean and Stably compressed air

Filling machine is a kind of packaging equipment, which is a machine that injects materials into containers. Manual filling is slow, low in efficiency, easy to cause contamination of filling materials, and some dangerous products can cause harm to human life and health, so the penetration rate of filling machines continues to increase. Filling machines can be widely used in industries such as chemicals, lubricants, coatings, edible oils, medicine, food, beverages, and daily chemicals.